A-Wing Specs

The original camera wing. Medium wing, attaching below the leg strap.

For a camera suit or camera jacket, this is a medium sized wing sewn directly into the side seam (as opposed to sewn onto the front of the arm) and attaches below the leg strap. The front of the wing has Nylon to give lift, and the back has Taslan for support.

Wing Reach

This wing reaches from mid-forearm and attaches below the leg strap.

Wing Attachment Point

This wing fastens with the standard Fastec® clip. A brass R.S.L clip is available upon request. FOR JACKETS: sew the Fastec® clip loop to the leg and then clip it to the wing. (Ask a rigger for help)

Lateral Band

It is very important that the wing does not extend below the rig's lateral band or a folding of the wing will occur, inhibiting the wing dynamics.

B-Wing Specs

This is the smallest camera wing with no attachment clip.

For a camera suit or camera jacket, this small wing is sewn directly into the side seam and stops at the waist, with no attachment clip. The front of the wing has nylon to give lift, and the back has Taslan® for support.

Wing Reach

This wing reaches from mid forearm and stops at the waist.

Lateral Band

It is very important that the wing does not extend below the rig's lateral band or a folding of the wing will occur, inhibiting the wing dynamics.

C-Wing Specs

The most popular camera wing! It is a medium wing for belly or back flying.

For a camera suit or camera jacket, this is a medium sized wing sewn onto the front of the arm to aid in back-flying. The front of the wing has nylon to give lift, and the back has Taslan® for support.

Wing Reach

This wing reaches from mid-forearm and attaches to the leg strap.

Wing Attachment Point

Fastens with the standard Fastec® clip. A brass R.S.L clip is available upon request. To attach the Fastec® clip loop, feed the leg strap through the loop and clip it to the wing. (Ask a rigger for help).

Lateral Band

It is very important that the wing does not extend below the rig's lateral band or a folding of the wing will occur, inhibiting the wing dynamics.

Our camera jackets are designed for the skydiver who needs a quick wardrobe change between jumps or for those who simply prefer a jacket over a full camera suit. They come in three wing sizes, the A-Wing, B-Wing and C-Wing. For the D-Wing please visit our full camera suit page.

We suggest you print the Measurement Guide PDF so you can write down the measurements, and we recommend wearing the clothes you're likely to jump in while taking measurements.

Watch Video

RETURN POLICY ON STOCK SUITS AND STORE ITEMS

TonySuits will accept returns for stock suits and store items with a restocking fee of $100 per box. Shipping cost back to TonySuits will be the customer's responsibility.

CUSTOM SUIT WARRANTY/RETURN POLICY

TonySuits has a 90 day fit warranty. This includes only items that are inconsistent with the original order as placed by the customer/dealer. Shipping will be included both ways for approved full warranties. Note: 90 days begins on the shipped date.

  • Returns for alterations will begin at $60 and require an email approving return shipment. The email must include the suit serial number (located inside the inner pocket), photos (with rig on!) from all angles and a complete written description of the areas to address. Please print and include inside the shipment.

For suits with fit issues, we will review and work with the customer/dealer on a case by case basis.

WARRANTY IS VOIDED WHEN:

  • The suit is built to the measurements provided. In that case, replacement will be priced on a case by case basis.
  • Unauthorized repairs (those not approved by TonySuits in advance) are done on the suit.
  • Notification is received at TonySuits after 90 days from the ship date. These requests will be reviewed and resolved on a case by case basis.
  • You choose NOT to follow the TonySuits maintenance and care instructions included with the original shipment.

Browse Stock Suits

Showing all 2 results